logo_web.JPG
www.inczedy.com
magyar zászló_kicsi.jpgbrit zászló_kicsi.jpg
Distributed companies
cab Produkttechnik GmbH & Co KG
logo-neu3.jpg
Since 1975 cab has been developing and manufacturing devices and system solutions for trade and industry. Their success is proven by their worldwide well known equipments.

High quality requires precision at production: more than 400 qualified employees and a reliable supplier base are making every effort to meet short delivery times requested, fast run times and an economic input-output ratio of the products. 98% of the parts are produced by the company itself.
Off-cut remover cab HEKTOR 2
Hektor_2.jpg
Operation:
Hektor is a tool to separate milled PCB's which are connected by small strips carefully and economically with its T- and L-blades. The PCB is slipped with its milled groove over the blade and is placed onto the matrix. The off-cut is pulled under the blade. When the foot switch is pressed, the off-cut is punched out and the waste material is collected inside the machine.

Blades are availble in the following sizes:
Part No. /
Descr.
Width of milled groove Recomended blade thickness Length of blade Length of cut Free of compon.
on solder side
Length of milled groove Widht of off-cut
8932137
Blade 1,5T
≥ 1,5 1,35 17,2 4,7 > 19,0 > 19,0 3,0
8932138
Blade 2,0T
≥ 2,0 1,85 17,2 5,2 > 19,0 > 19,0 3,0
8932191
Blade 2,4T
≥ 2,4 2,25 18,0 5,7 > 19,0 > 19,0 3,0
8932139
Blade 2,5T
≥ 2,5 2,35 18,0 5,7 > 19,0 > 19,0 3,0
8932144
Blade 3,0T
≥ 3,0 2,85 18,0 5,7 > 19,0 > 19,0 2,5
8932122
Blade 1,5L
≥ 1,5 1,35 12,0 4,7 > 15,0 > 13,0 3,0
8932123
Blade 2,0L
≥ 2,0 1,85 12,0 5,2 > 15,0 > 13,0 3,0
8932141
Blade 2,4L
≥ 2,4 2,25 12,0 5,7 > 15,0 > 13,0 3,0
8932124
Blade 2,5L
≥ 2,5 2,35 12,0 5,7 > 15,0 > 13,0 3,0
8932125
Blade 3,0L
≥ 3,0 2,85 12,0 5,7 > 15,0 > 13,0 2,5
PCB Separator cab Maestro 2 and cab Maestro 2M
MAESTRO_2M.jpg
MAESTRO 2: The PCB is fed manually between the circular blades and is thereby separated.
MAESTRO 2M: Separates large numbers of PCBs without fatigue of the operator. The lower circular blade is driven by a motor.

Operation:
The PCB is held with both hands and fed between the circular blades for separation. The clearance between the upper guide and the lower guide is adjustable to ensure that the PCB is only fed through the machine in the pre-scored groove.
Technical Data
PCB thickness: 0,8..3,2 mm
Remaing PCB thickness: typical 1/3 of PCB thickness. max. 0,8mm
Depth of scoring min. 0,25mm
Increase in external dimensions after separation 0,1..0,2mm
Separation length 15..300mm
Separation speed (2M) 100/200/300 mm/s
Weight Maestro 2: 16kg
Maestro 2M: 19kg
Dim. HxWxD: 330x195x620 mm
PCB Separator cab MAESTRO 3E
MAESTRO_3E.jpg
Operation:
The PCB is placed with its pre-scored groove onto the linear blade and the circular blade is then drawn by hand across the PCB.
The clearance between the upper guide and the linear blade ist adustable to ensure that the PCB is only separated in the pre-scored groove.
Technical Data
PCB thickness: 0,8..3,2 mm
Remaining PCB thickness: typical 1/3 of PCB thickness max. 0,8mm
Increase in external dimensions after separation 0,1..0,2mm
Depth of scring min 0,25mm
Separation lenght max. 450mm
Weight 22kg
Dim H x W x D 455x350x700mm
PCB Separator cab MAESTRO 4S
MAESTRO_4M.jpg
Operation:

The PCB is placed with its pre-scored groove onto the linear blade. When the foot switch is pressed, the blade carrier with the circular blade moves across the PCB, separating it into individual units.
The MAESTRO 4S separates both large and small PCBs quickly, economically and without stress. Cutting with only a single traverse of the pre-scored groove causes tensile and compressive stresses that can damage sensitive components near the groove. Even a second traverse of the groove accompanied by an adjustment of the blade distance substantially reduces the tensile and compressive stresses. This significantly improves the quality of the populated PCBs
Technical data
PCB thickness 0,8..3,2mm
Remaining PCB thickness typical 1/3 of thickness, max 0,8mm
Depth of scoring min. 0,25mm
Increase in external dimensions after scoring 0,1..0,2mm
Separation speed 300/500 mm/s
Material of conveyor belt (option) antistatic
Belt speed (option) 5/6/7/8/9 m/min
Light barrier (option) can be activated for belt stoppage
Width of table 540mm (option)
Weight 44kg
Dust extraction Conveyor Lenght of device (mm) Hight of device (mm) Separation lenght (mm) Component height behind the groove (mm) Weight (kg)
Maestro 4M/450 option 702 434 450 40 38
Maestro 4M/450 Clean X option 702 434 450 40 39
Maetsro 4M/70 option 702 492 370 70 40
PCB Separator cab MAESTRO 5L
MAESTRO_5M.jpg
is used most economically whenever large numbers of prescored PCBs need to be separated. The well-arranged control panel ensures easy operation. PCB panels with a maximum width of 310 mm can be separated by up to 10 circular blades simultaneously.

The PCBs are placed either by hand or they are fed automatically by a loading station. The machine can also be installed in an assembly line. The PCB Separator MAESTRO 5L can be adjusted to your PCB and your individual requirements.
Technical data
PCB thickness 0,8..3,2mm
Remaining PCB thickness typical 1/3 of PCB thickness, min. 0,3mm, max 0,6mm
Depth of scoring min. 0,3mm
Increase in external dimensions after separation 0,1..0,2mm
Separation type component side circular blade
solder side circular blade
Operation motorized
Separation speed 100..220mm/s in 10 steps
Lenght of PCB panel with light barrier activated 100..570mm
Lenght of PCB panel with light barrier de-activated >100mm
Width of PCB panels max. 310mm
Heigth of components component max30mm
solder side max 10mm
Number of circular blades max. 10
Width of PCBs 10..290mm
Weight 63kg
Dimensions with base (HxWxD) 750-1000x440x800mm
Spare parts
Nutzent Ersatzteile.jpg
Part No Description PU Maestro 2 Maestro 2M Maestro 3E Maestro 4M Maestro 4M 70 Maestro 5M
8930744 Upper Guide 1
8930603 Guide 2; up to serial nr. 1999 1
8930602 Guide 1; up to serial nr. 1999 1
8936615 Guide 2; from serial nr. 2000l 1
8936614 Guide 1; from serial nr 2000 1
8930509 Upper circular blade "TI" 1
8930501 Upper circular blade 1
8930745 Lower guide 1
8933661 Lower circular blade "TI" 1
8933939 Upper circular blade passage height 70mm 1
8930756 Guide 2/70 1
8930755 Guide 1/70 1
8934803 Circular blade width 8mm 1
8933394 Linear blade 450/370 "TI" 1
8933931 Linear blade 450/370 "TI" Clean 1
8970208 Mérőóra a következő tesztekhez:
1.) körkés koncentrikus futása
2.) lineáris él elhajlása
3.) lineáris él és körkés párhuzamossága
1
Part No. Description PU
8932137 Blade 1,5T 1
8932138 Blade 2,0T 1
8932191 Blade 2,4T 1
8932139 Blade 2,5T 1
8932144 Blade 3,0T 1
8932122 Blade 1,5L 1
8932123 Blade 2,0L 1
8932141 Blade 2,4L 1
8932124 Blade 2,5L 1
8932125 Blade 3,0L 1
8932171 Matrix 1
PCB Magazines
LPM-Serie-600.jpg
Precision, stability and flexible handling are important features for the use of the PCB Magazines in automated assembly lines.
The stable and robust frame construction guarantees a long lasting use of the cab magazine in your production. The sidewalls are manufactured from conductive material.

3 types of magazines:
Series 600 - Width adjustment by screw clamp
Series 700 - Width adjustment by gear belt
Series 800 - Full automatic width adjustment
601
701
801
602
702
802
603
703
803

713
813

704
804

705
805

715
815

706
806

716
816

707
807

717
817

708
808

718
818
D = PCB widht
min
max

10
250

10
250

10
310

10
390

10
330

10
310

10
310

10
390

10
390

10
460

10
460

10
400

10
400
C = PCB lenght max 342 387 387 347 447 5222 522 522 522 522 522 522 522
L = Lenght of magazina 355 400 400 400 460 535 535 535 535 535 535 535 535
H = hight of magazine 563 563 563 563 563 570 563 570 563 570 563 570 563
A = 34 34 34 34 34 34 34 34 34 34 34 34 34
B = 34 34 34 34 34 41 34 41 34 34 34 41 34
B' = 34 34 34 34 34 34 34 34 34 41 34 34 34
Weight (kg) 5,3 5,4 6,0 7,5 7,8 8,3 8,3 9,1 9,1 9,3 9,3 9,2 9,2
Kivitel S
R









Szélesség állítás Csavarok (600-as sorozat)
(700-as sorozat)
(800-as sorozat)


























Tető és padlólemez anyaga
Alumínium:


























Oldalfalak anyaga
Fekete polisztirol
Álladó működés közbeni hőmérséklet 50°C
Felület ellenállása 10^8 – 10^9 Ω